The housing of the magnetic filter CC is equipped with a magnetic rod. The magnetic rod is equipped with highly efficient neodymium magnets which have an extremely high field force. The dirty liquid flows along the magnetic rod and the particles are pulled onto the surface of the magnetic rod and held there. The specially designed flow inside the housing of the magnetic filter makes sure that the liquid flows slowly and evenly along the magnetic rod. Due to this, even very small particles down to 1 µm and less will be attracted by the magnetic field and will stick to the surface of the magnetic rod. Even if the magnetic filter rod is completely covered with dirt particles, the full flow is maintained.

The magnetic filter CC works without consumables and doesn’t need additional energy. Once installed no further operation costs are necessary. With the magnetic filter CC, the collected dirt can be cleaned off even when the housing is closed. To clean the filter, the inlet and outlet valves are first closed. Then the magnets, which are movably mounted in the magnetic filter rod, are pulled out upwards by hand. Then only the bottom drain valve needs to be opened and the collected dirt is rinsed out of the magnetic filter housing with the liquid still contained in the filter housing. After closing the bottom drain valve and pushing the magnets back into working position, the magnetic filter CC is ready for operation again.


  • Removes particles down to 1 µm
  • No filter aids required
  • No additional energy necessary
  • Easy cleaning without opening the filter housing
  • No consumables necessary
  • Dirt particles can be quickly and easily recycled according to type
  • Longer service life for cooling lubricant, washing water, grinding oil etc.
  • Improved surface quality for grinding processes


  • Washing water
  • Cooling lubricant
  • Processing oil
  • Hydraulic oil


Areas of Application:

  • Grinding
  • Honing
  • Eroding
  • Lapping
  • Washing
  • Pretreatment
  • Hardening
  • Test benches