+49 (0) 21 73 / 52 011
Your request has been sent successfully.
An error has occurred. Please try again later.

Magnetic Filter CC

Efficient cleaning with the proven Friess Magnetic Filtration.

Dank Magnetfilter Partikel ohne Verbrauchsmaterialien entfernen

What is distinctive about the Magnetic Filter CC?

The housing of the Magnetic Filter CC is equipped with a magnetic filter rod. Movable neodymium magnets create an efficient magnetic field, whereby particles contained in the liquid are attracted.

Due to the flow in the housing of the Magnetic Filter, the fluid passes the Magnetic Filter rod particularly slowly and evenly. As a result, even the smallest particles are drawn onto the surface of the Magnetic Filter rod and held there. Even if the Magnetic Filter rod is completely covered with dirt particles, the full flow is maintained, preventing any blockage.

Cleaning of the Friess Magnetic Filter CC can be done in two ways: either when the Magnetic Filter is closed or when it is open. In the first variant, the movable magnets are pulled out of the filter to discharge the sludge together with the remaining liquid through the drain valve. In the second variant the magnets are also pulled out. However, in this case the particles are removed by hand. Compared to the Friess Magnetic Filter FMF, this method is much easier, as with the Magnetic Filter CC the magnetic force no longer acts on the particles during cleaning.

Technical Data

Water based liquid

Max. flow rate: 100 l/min
Temperature:  5 °C to 60 °C
Dirt collection capacity: 0,8 kg
Max. pressure: 5 bar
Connection: 1″ BSP

Oil based liquid

Max. flow: 50 l/min
Temperature:  5 °C to 60 °C
Dirt collection capacity: 0,8 kg
Max. pressure: 5 bar
Connection: 1″ BSP

  • Remove particles down to a size of 1 µm.
  • Improve surface quality in grinding processes.
  • Friess magnetic filtration increases the service life of your cooling lubricant, wash water, grinding oil and other fluids.
  • You do not need any filter aids or additional energy.
  • Recycle the dirt particles afterwards and improve your eco-balance.
Typical applications
  • Grinding
  • Honing
  • Eroding
  • Lapping
  • Washing
  • Pretreatment
  • Tempering
  • Test benches